Today, Hefei Sanle takes you to understand the key steps of the maintenance of the moon cake machine to make the moon cake machine work better. We must maintain the regular maintenance of the moon cake machine so that the moon cake machine can have higher efficiency and longer life. .

The key steps of moon cake machine maintenance are cleaning, tightening, adjusting, lubricating and anti-corrosion. In the daily production process, the maintenance personnel of each machine should do, according to the maintenance manual and the repaired moon cake machine equipment regulations, strictly perform the maintenance work according to the prescribed cycle, reduce the wear rate of parts, eliminate hidden hidden troubles, and extend the life of the machine.

The key steps of moon cake machine maintenance:

1. Routine maintenance of moon cake machine

The moon cake machine must be cleaned, lubricated, inspected and tightened during the daily maintenance. The machine must be routinely maintained as required after work.

Second, the daily maintenance of the moon cake machine

The first-level maintenance work of the moon cake machine is carried out on the basis of routine maintenance, and the main work content is to lubricate, tighten and inspect all relevant parts and their cleaning work.
The second-level maintenance work focuses on inspection and adjustment. Specifically check the engine, clutch, transmission, transmission components, steering and braking components.
The focus of the three-level maintenance of the moon cake machine is to detect, adjust, eliminate hidden troubles and balance the wear of each component. It is necessary to carry out diagnostic tests and status checks on the parts that affect the performance of the equipment and the parts with symptoms of failure, and then complete the necessary replacement, adjustment and troubleshooting.

3. Special maintenance of moon cake machine

The maintenance of the moon cake machine is a key step. The maintenance means of seasonal changes, the key components of packaging equipment such as fuel systems, inspection and maintenance of hydraulic systems, cooling systems and starting systems every summer and winter.

Decommissioning maintenance means that the moon cake machine packaging equipment should be cleaned, facelifted, matched, and antiseptic when it needs to be shut down for a period of time due to seasonal factors (such as the winter break).